POOL & SPA SOLUTIONS | Sun Shelf 26 | 941-302-8081
1:100 display model; all STL/3MF coordinates are millimeters. Do not auto-scale.
Main waterline: 26 x 12 ft = 79.248 x 36.576 mm. Water depth 13.716 mm.
Open numbered plates in your slicer, not the assembly reference. Default target: 220 x 220 mm bed, 0.4 mm nozzle, 0.16 mm layers, 3 walls, 15% infill. Verify your printer profile and preview every layer.
Print the base flat. Water plates are already inverted with their feet pointing up. Use one color, or change filament for the last 0.8 mm of front brand relief; preview other raised features before choosing a color-change layer.
Mesh integrity and bed dimensions were checked. Printer-specific slicing and an actual test print remain required.
Measured residential concept; final engineering, listed equipment, permit approval and field inspections are pending.

Display accommodations:
- Continuous backing below the measured pool floor supports the assembly.
- Exposed pool/deck/spa dimensions and top levels retain 1:100 scale.
- Brand panel, lettering and routing card are unscaled display accessories.
- Water inserts have 0.2mm radial fit clearance, 1.2mm skin and support feet; print face down.
- Thin rails, fence, house and landscaping are omitted from printed solids; see the full-size 3D model.
- PVC card preserves projected circuit centerlines at 1:100 with 1.4mm enlarged relief. It is not an installation drawing.
- Construction shell/paver layer thicknesses are preserved in the full-size source; fused display backing is not a construction layer.
- Paver and coping joints are deliberately enlarged to 0.40mm wide and recessed 0.24mm; nominal layout spacing is 2ft.
- Waterline tile lower-edge grooves are 0.24mm high and approximately 0.20mm deep, enlarged for monochrome display.
- Return and spa-jet markers retain measured centers with supported 1.1mm minimum display diameter and 1.0mm height.
- Stair, shelf, bench and raised-spa approach edge profiles include a documented 0.04mm manufacturing overlap; exposed top elevations and the overall waterline remain at exact 1:100 scale.
- Internal wet concrete/finish partitions are fused from their verified unchanged exterior before making the one-color display body.
- The unscaled display frame reserves 1.9mm nominal ink clearance between the company branding and design title; actual vector bounds and zero overlap are checked.
